Angle
5 to 30°.
Laptop stand to 3D print
Generate a pair of angled laptop risers with a front stop: better posture, typing and airflow. Choose angle and size. Free.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the laptop stand generator
Tilting a laptop a few degrees improves typing, raises the screen a little and lets air flow underneath. This generator makes a pair of risers: the laptop rests on top, and a stop at the front keeps it from sliding.
The risers print on their side, strong and support-free. Choose the angle, the length (laptop depth) and the width of each riser.
What you can adjust
Front stop
The laptop does not slide.
Pair of risers
One on each side, in any width.
Airflow
Air circulates under the laptop.
Ideas for use
- Home office
- Study desk
- Gaming laptop (more airflow)
- Meeting table
How it works
- Choose the angle and length (laptop depth).
- Click "Create in the editor": both risers open ready.
- Print them on their side, as they are, and place one on each side.
How to print
- Material
- PLA or PETG
- Layer height
- 0.2 to 0.28 mm
- Walls
- 3 perimeters
- Supports
- Not needed
- Stick rubber feet underneath so they do not slide on the desk.
- If the length exceeds your bed, use a smaller angle or a shorter riser.
FAQ
Which angle is best?
10 to 20° for typing. With an external keyboard, larger angles raise the screen more.
Will it fit my print bed?
The risers print on their side: the length must fit the bed (220 mm fits almost all).
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
Create your laptop stand now ↑
More generators
Phone stand to 3D print
Custom angle and fit, with a cable slot.
Tablet stand to 3D print
For tablets and iPads, with angle and cable slot.
Card deck box to 3D print
For decks, UNO, tarot and card games, sleeved or not.
Dice tray to 3D print
Hexagonal, round or rectangular, for RPGs and board games.
Dice tower to 3D print
Inner ramps and an exit tray.
Ruler to 3D print
Raised marks and numbers, in cm or inches.
Headphone stand to 3D print
Desk stand (column and arc) or under-desk hook.
Bag clip to 3D print
A rod and C channel that lock the bag.