3D printer bed sizes (build volume)
The bed size (build volume) is the largest part your printer can make in one go: width (X) × depth (Y) × height (Z). Pick yours below to open the Lok3D editor with that bed: the choice is remembered for your next projects.
Bambu Lab
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Bambu Lab A1 mini | 180 × 180 × 180 mm | Open with this bed |
| Bambu Lab A1 | 256 × 256 × 256 mm | Open with this bed |
| Bambu Lab P1S / P1P / X1C | 256 × 256 × 256 mm | Open with this bed |
| Bambu Lab H2D | 350 × 320 × 325 mm | Open with this bed |
Creality
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Creality Ender 3 / V2 / V3 SE | 220 × 220 × 250 mm | Open with this bed |
| Creality Ender 3 V3 KE | 220 × 220 × 240 mm | Open with this bed |
| Creality K1 / K1C | 220 × 220 × 250 mm | Open with this bed |
| Creality K1 Max | 300 × 300 × 300 mm | Open with this bed |
| Creality K2 Plus | 350 × 350 × 350 mm | Open with this bed |
| Creality Ender 5 S1 | 220 × 220 × 280 mm | Open with this bed |
Prusa
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Prusa MK4 / MK4S | 250 × 210 × 220 mm | Open with this bed |
| Prusa Core One | 250 × 220 × 270 mm | Open with this bed |
| Prusa MINI+ | 180 × 180 × 180 mm | Open with this bed |
| Prusa XL | 360 × 360 × 360 mm | Open with this bed |
Elegoo
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Elegoo Neptune 4 / 4 Pro | 225 × 225 × 265 mm | Open with this bed |
| Elegoo Neptune 4 Plus | 320 × 320 × 385 mm | Open with this bed |
| Elegoo Neptune 4 Max | 420 × 420 × 480 mm | Open with this bed |
| Elegoo Centauri Carbon | 256 × 256 × 256 mm | Open with this bed |
Anycubic
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Anycubic Kobra 3 | 250 × 250 × 260 mm | Open with this bed |
| Anycubic Kobra 2 Neo | 220 × 220 × 250 mm | Open with this bed |
Qidi
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Qidi Q1 Pro | 245 × 245 × 240 mm | Open with this bed |
| Qidi X-Max 3 | 325 × 325 × 315 mm | Open with this bed |
Sovol
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Sovol SV06 | 220 × 220 × 250 mm | Open with this bed |
| Sovol SV08 | 350 × 350 × 345 mm | Open with this bed |
Flashforge
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Flashforge Adventurer 5M | 220 × 220 × 220 mm | Open with this bed |
Other
| Printer | Build volume (X × Y × Z) | |
|---|---|---|
| Large (300 × 300 × 400) | 300 × 300 × 400 mm | Open with this bed |
Is your printer not on the list? In the editor, Print tab, pick "Custom…" and type the bed size: it is remembered too.
Frequently asked questions
What if my part is bigger than the bed?
Use the Slice tool in Lok3D to cut it into pieces with pins, dowels or magnets, so they fit back together after printing. Or reduce the size proportionally.
Can I fill several plates, like in Bambu Studio?
Yes. In Lok3D you can add plates, arrange all parts automatically and download (or open in the slicer) one plate at a time.
Why use less than the full bed?
Leave a few millimeters from the edges: the first layer and the brim need room, and some printers (like those with a purge line) use part of the bed.
How to use several plates and the right bed size for your printer