Hole spacing
16 to 320 mm, matching your furniture.
Drawer and cabinet handle to 3D print
Generate bar handles (with your furniture's hole spacing: 64, 96, 128 mm...) or knobs, with a hole for a screw or heat-set insert. Free and online.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the cabinet handle generator
A broken or discontinued handle is a common problem: the door holes have a fixed spacing and the new one has to match. Here you type the hole spacing (64, 96, 128, 160 mm or anything else) and the generator makes a bar with the posts in the right place.
The bar prints on its side, with the posts lying down, so it is strong. Choose a hole for a screw straight into the plastic or for a heat-set insert, and there is also a knob for small drawers.
What you can adjust
Bar or knob
Bar with rounded corners or single-hole knob.
Mounting
Hole for M3, M4 or M5 screws into plastic or for an insert.
Height and thickness
How far it sticks out and how thick the grip is.
Ideas for use
- Replace a kitchen drawer handle
- Swap wardrobe handles
- Knobs for small drawers
- Handle for a box or cabinet
- Customize furniture with colors
How it works
- Measure the distance between the hole centers and choose bar or knob.
- Click "Create in the editor": the handle opens ready.
- Print as is and fasten it with screws from inside the door.
How to print
- Material
- PETG or PLA
- Layer height
- 0.2 mm
- Walls
- 4 perimeters
- Infill
- 40%
- Supports
- Not needed
- With a heat-set insert, the screw can be tightened and loosened many times.
- Screws straight into plastic: do not overtighten.
FAQ
What is the most common hole spacing?
96 mm and 128 mm are the most common in furniture; 64 mm and 160 mm are also frequent.
What is a heat-set insert?
A threaded brass insert you melt into the plastic with a soldering iron. The screw then bites into metal.
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
Create your cabinet handle now ↑
More generators
Snap-fit end cap to 3D print
Round or rectangular plug with flexible tabs and a locking lip.
Furniture foot to 3D print
Round or square, screwed or with a leg socket.
Spacer and bushing to 3D print
Exact diameter, hole and length, with optional flange.
Washers and shims to 3D print
A set of washers or U shims in several thicknesses.
Pipe clamp to 3D print
Saddle with ears or C clip, sized to the pipe.
Hose and vacuum adapter to 3D print
Reducer between two diameters, for vacuums and hoses.
Pulley and wheel to 3D print
V groove, O-ring groove or flat; round or D bore.
Box with lid to 3D print
Exact inner size, fitted or sliding lid and dividers.