Two styles
Saddle with two ears or snap-in C clip.
Pipe clamp to 3D print
Generate saddle clamps with two ears or snap-in C clips, sized to your pipe, tube or hose. With countersunk holes. Free.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the pipe clamp generator
Fixing a pipe, LED tube, hose or thick cable to a wall needs a clamp of the right diameter. This generator makes two styles: the saddle, which wraps the pipe and screws down at both ears, and the C clip, where the pipe snaps in.
Both print on their side so the arc is strong, and have countersunk holes so the screw head sits flush.
What you can adjust
Pipe diameter
5 to 110 mm, with adjustable clearance.
Countersunk holes
For M3, M4 or M5 screws.
Width and thickness
Width 8 to 50 mm, thickness 2 to 8 mm.
Ideas for use
- PVC and copper pipe
- Aluminum and round steel tube
- Garden hose
- Round LED profile
- Cables and conduits
How it works
- Measure the outside diameter of the pipe and choose the style.
- Click "Create in the editor": the clamp opens on its side, ready to print.
- Print and screw it down.
How to print
- Material
- PETG (flexes without breaking)
- Layer height
- 0.2 mm
- Walls
- 4 perimeters
- Infill
- 30%
- Orientation
- On its side (as it opens)
- For the C clip, use PETG: it has to flex for the pipe to go in.
- Outdoors, prefer PETG or ASA, which handle sunlight.
FAQ
What is the difference between the styles?
The saddle presses the pipe against the wall and holds it firmly. The C clip lets the pipe snap in and out without unscrewing.
The pipe is loose.
Reduce the clearance to 0 or 0.1 mm, or enter a diameter 0.5 mm smaller.
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
More generators
Snap-fit end cap to 3D print
Round or rectangular plug with flexible tabs and a locking lip.
Furniture foot to 3D print
Round or square, screwed or with a leg socket.
Spacer and bushing to 3D print
Exact diameter, hole and length, with optional flange.
Washers and shims to 3D print
A set of washers or U shims in several thicknesses.
Drawer and cabinet handle to 3D print
Bar with your furniture's hole spacing, or a knob.
Hose and vacuum adapter to 3D print
Reducer between two diameters, for vacuums and hoses.
Pulley and wheel to 3D print
V groove, O-ring groove or flat; round or D bore.
Box with lid to 3D print
Exact inner size, fitted or sliding lid and dividers.