Holes or slots
Holes for screwdrivers and brushes; open slots for pliers and scissors.
Wall tool holder to 3D print
Generate a wall shelf with holes or slots for screwdrivers, pliers, brushes and drill bits, with gussets and screw holes. Free and online.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the tool holder generator
Screwdrivers, pliers and brushes are much better hung on the wall: you find them instantly and keep the bench clear. This holder is a shelf with holes (or slots open at the front) attached to a wall plate, with triangular gussets at the ends.
It prints upside down (shelf on the bed), so everything comes out without supports and the load-bearing part is solid. Adjust the number and diameter of the holes to your tools.
What you can adjust
Quantity and diameter
Up to 30 holes of 3 to 30 mm.
Gussets
Triangles at the ends support the shelf.
Wall holes
Two countersunk M4 screw holes (optional).
Ideas for use
- Flat and Phillips screwdrivers
- Pliers and scissors
- Brushes and drill bits
- Allen and open-end wrenches
- Small garden tools
How it works
- Choose the width and the number and diameter of holes (measure the thickest shaft).
- Click "Create in the editor": the holder opens upside down, ready to print.
- Print, flip it and screw it to the wall with anchors.
How to print
- Material
- PETG or PLA
- Layer height
- 0.2 mm
- Walls
- 3 to 4 perimeters
- Infill
- 25%
- Supports
- Not needed
- The hole should be 1–2 mm larger than the shaft and smaller than the handle.
- For pliers, use 8 to 12 mm slots.
- If it is wider than your bed, make two shorter pieces.
FAQ
How do I choose the hole diameter?
Measure the tool shaft (the metal part) and add 1 to 2 mm. The handle must be thicker than the hole so the tool does not fall through.
Why print it upside down?
That way the shelf rests on the bed and the gussets grow at 45°: nothing hangs in the air.
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
More generators
Box with lid to 3D print
Exact inner size, fitted or sliding lid and dividers.
Gridfinity bins to 3D print
Standard 42 mm base, dividers and magnet holes.
Drawer organizer to 3D print
Trays that fill the whole drawer, made to its size.
Drawer and shelf label to 3D print
Raised two-color text, with tape, screws or magnets.
Wall hook to 3D print
J hook printed on its side: strong, with countersunk holes.
Cable organizer to 3D print
Channels sized to the cable that snap in.
Battery holder to 3D print
AA, AAA, 18650, CR2032 or 9V, in columns and rows.
Toothbrush holder to 3D print
Cup with a holed insert that keeps each brush apart.