Text that fits
Letters are as large as fits on the label.
Drawer and shelf label to 3D print
Create labels with raised text for drawers, bins and shelves, with double-sided tape, screw holes or magnets. Two colors, free and online.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the drawer label generator
3D printed labels last much longer than paper and are readable from afar: the text is raised and in another color. The generator automatically fits the letter size to the label.
Choose how to mount it: double-sided tape (flat back), two countersunk M3 screw holes, or pockets for 6×2 mm magnets on the back, great for metal cabinets and tool chests.
What you can adjust
Three mountings
Double-sided tape, countersunk M3 screws or 6×2 mm magnets.
Optional frame
A raised border in the letter color.
Two colors
Base and letters as separate parts in the 3MF.
Seven fonts
From chunky letters to tall condensed fonts.
Ideas for use
- Workshop and tool drawers
- Storage bins and jars
- Pantry shelves
- Metal cabinets (with magnets)
- Bookshelves and file boxes
How it works
- Type the text and size, and choose how to mount it.
- Click "Create in the editor": the label opens ready.
- Download 3MF to print in two colors, or swap filament at the letter height.
How to print
- Material
- PLA
- Layer height
- 0.2 mm (0.12 mm for small letters)
- Infill
- 20%
- Supports
- Not needed
- For letters under 6 mm, use Archivo Black or Bebas Neue and thin layers.
- Glue magnets in with a drop of super glue.
- For a single color, use 0.6 mm relief and paint the letter tops with a marker.
FAQ
How do I print two colors without an AMS?
Pause the print at the height where the letters start (the base thickness) and swap filament.
What is the minimum size?
30 × 12 mm. Below that, the letters get too small for a 0.4 mm nozzle.
Do magnets fit in a thin label?
The magnet pocket needs at least 2.4 mm of thickness. On thinner labels it is left out.
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
Create your drawer label now ↑
More generators
Box with lid to 3D print
Exact inner size, fitted or sliding lid and dividers.
Gridfinity bins to 3D print
Standard 42 mm base, dividers and magnet holes.
Drawer organizer to 3D print
Trays that fill the whole drawer, made to its size.
Wall hook to 3D print
J hook printed on its side: strong, with countersunk holes.
Cable organizer to 3D print
Channels sized to the cable that snap in.
Battery holder to 3D print
AA, AAA, 18650, CR2032 or 9V, in columns and rows.
Wall tool holder to 3D print
Shelf with holes or slots for screwdrivers and pliers.
Toothbrush holder to 3D print
Cup with a holed insert that keeps each brush apart.