Round or square
15 to 120 mm, with rounded edges.
Furniture foot to 3D print
Generate round or square furniture feet, straight or tapered, with a screw hole or a socket for the leg. Raise furniture to the right height. Free and online.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the furniture foot generator
A sofa, dresser or table foot that broke or is too short: instead of hunting for the right part, generate a new foot at the height and diameter you need. It also levels furniture on uneven floors.
The foot can be fastened with a screw through the middle (with a counterbore for the head underneath) or have a socket on top where the furniture leg goes in. Choose round or square and how much it tapers.
What you can adjust
Tapered
The bottom can be 60% to 120% of the top.
Screw or socket
M3, M4 or M5 hole with counterbore, or a socket for the leg.
Any height
5 to 80 mm: works as a shim too.
Ideas for use
- Replace a sofa or armchair foot
- Raise furniture for a robot vacuum
- Level a table or shelf on an uneven floor
- Cap for a metal table leg
- Feet for boxes and cabinets
How it works
- Measure the foot diameter and the height you need; choose screw or socket.
- Click "Create in the editor": the foot opens ready.
- Print as is and attach it to the furniture.
How to print
- Material
- PETG or PLA
- Layer height
- 0.2 mm
- Walls
- 4 perimeters
- Infill
- 40 to 60%
- Supports
- Not needed
- For heavy furniture, use high infill (50% or more) and 4 perimeters.
- Glue felt underneath to protect the floor.
- Print all 4 feet at once so they match.
FAQ
Can it hold a sofa?
Yes, with 50% or more infill and 4 perimeters. The part works in compression, which is what printed plastic handles best.
Which screw should I use?
The hole has clearance for the screw to pass; it bites into the furniture wood. Use a wood screw of the chosen size.
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
Create your furniture foot now ↑
More generators
Snap-fit end cap to 3D print
Round or rectangular plug with flexible tabs and a locking lip.
Spacer and bushing to 3D print
Exact diameter, hole and length, with optional flange.
Washers and shims to 3D print
A set of washers or U shims in several thicknesses.
Drawer and cabinet handle to 3D print
Bar with your furniture's hole spacing, or a knob.
Pipe clamp to 3D print
Saddle with ears or C clip, sized to the pipe.
Hose and vacuum adapter to 3D print
Reducer between two diameters, for vacuums and hoses.
Pulley and wheel to 3D print
V groove, O-ring groove or flat; round or D bore.
Box with lid to 3D print
Exact inner size, fitted or sliding lid and dividers.