Exact sizes
Diameter 3 to 80 mm, hole 0 to 70 mm, length 1 to 100 mm.
Spacer and bushing to 3D print
Generate round or hex spacers and bushings with exact outer diameter, hole and length, with or without a flange, in any quantity. Free and online.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the spacer and bushing generator
Spacers and bushings show up everywhere: between a board and its case, in a wheel, on a toy axle, on a shelf. With this generator you enter the outer diameter, the hole and the length and print as many as you need.
You can choose a hex shape (easy to hold with a wrench) and a flange at one end, which acts as a washer and stops the bushing from going through the hole.
What you can adjust
Round or hex
Hex is easy to hold with a wrench or pliers.
Optional flange
Adjustable flange diameter and thickness.
In bulk
Up to 20 identical parts at once.
Ideas for use
- PCB standoffs
- Wheel and axle bushings
- Shelf and frame spacers
- Screw spacers
- Toy and furniture repairs
How it works
- Enter the outer diameter, hole and length.
- Click "Create in the editor": the spacers open ready.
- Print them standing, as they are.
How to print
- Material
- PETG or PLA
- Layer height
- 0.16 to 0.2 mm
- Walls
- 3 perimeters
- Infill
- 100% for small parts
- Supports
- Not needed
- Small holes print slightly undersized: add 0.2 mm to the screw diameter.
- For a rotating axle, use PETG and a bit of graphite.
FAQ
The screw did not fit through the hole. Now what?
Printed holes shrink a little. Increase the hole by 0.2 to 0.4 mm (for example, 3.4 mm for M3).
What is the minimum wall?
The generator keeps at least 0.6 mm of wall on each side; for strength, prefer 1.5 mm or more.
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
Create your spacer and bushing now ↑
More generators
Snap-fit end cap to 3D print
Round or rectangular plug with flexible tabs and a locking lip.
Furniture foot to 3D print
Round or square, screwed or with a leg socket.
Washers and shims to 3D print
A set of washers or U shims in several thicknesses.
Drawer and cabinet handle to 3D print
Bar with your furniture's hole spacing, or a knob.
Pipe clamp to 3D print
Saddle with ears or C clip, sized to the pipe.
Hose and vacuum adapter to 3D print
Reducer between two diameters, for vacuums and hoses.
Pulley and wheel to 3D print
V groove, O-ring groove or flat; round or D bore.
Box with lid to 3D print
Exact inner size, fitted or sliding lid and dividers.