Holed lid
1 to 8 holes, each brush stays apart.
Toothbrush holder to 3D print
Generate a toothbrush cup with a holed insert that keeps each brush apart, plus a drainage hole. Choose diameter, height and number of holes. Free and online.
- Free
- No sign-up
- STL and 3MF
- Millimeter precise
- Runs in the browser
About the toothbrush holder generator
In a regular cup, toothbrushes touch each other and water pools at the bottom. This holder has a lid with holes that keeps each brush upright and apart, and a hole in the bottom so water drains.
There are two parts: the cup and the lid, which fits inside with a lip. Choose the diameter, height, number of holes and their size. It also works for makeup brushes and pens.
What you can adjust
Drainage hole
Water does not pool at the bottom (optional).
Inner fit
The lid has a lip that goes into the cup.
Two colors
Cup and lid in different colors.
Ideas for use
- Family toothbrushes
- Makeup brushes
- Pens and pencils
- Paint brushes
How it works
- Choose the diameter, height and number of holes.
- Click "Create in the editor": cup and lid open ready.
- Print both parts as they are and fit the lid.
How to print
- Material
- PETG (handles moisture)
- Layer height
- 0.2 mm
- Walls
- 3 perimeters
- Supports
- Not needed
- 14 to 16 mm holes fit most toothbrushes.
- PETG handles bathroom humidity better than PLA.
FAQ
Can I wash it?
Yes, with soap and water. Avoid the dishwasher with PLA (it softens with heat).
Does an electric toothbrush fit?
Increase the hole to 22–30 mm, depending on the brush handle.
Is it free?
Yes. The maker and the editor are free and run in your browser. Without an account, the project is kept for 48 hours; with a free account, it is kept in your account.
Which format do I download?
3MF (recommended: keeps colors and opens directly in Bambu Studio, OrcaSlicer and Creality Print), STL or OBJ, always in millimeters.
Create your toothbrush holder now ↑
More generators
Box with lid to 3D print
Exact inner size, fitted or sliding lid and dividers.
Gridfinity bins to 3D print
Standard 42 mm base, dividers and magnet holes.
Drawer organizer to 3D print
Trays that fill the whole drawer, made to its size.
Drawer and shelf label to 3D print
Raised two-color text, with tape, screws or magnets.
Wall hook to 3D print
J hook printed on its side: strong, with countersunk holes.
Cable organizer to 3D print
Channels sized to the cable that snap in.
Battery holder to 3D print
AA, AAA, 18650, CR2032 or 9V, in columns and rows.
Wall tool holder to 3D print
Shelf with holes or slots for screwdrivers and pliers.